KEL-FG-ER | Split flange enclosure
for 90° feed-in of cables with connectors / IP65
The cable entry frames KEL-FG-ER are suited for installation of cables with connectors and conduits at an angle of 90° to the cabinet, enclosure or machine wall, providing an IP65 rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 13 to 35 mm (single-hole grommets KTG 13 - KT 34).
The KEL-FG-ER-A frame matches exactly the cut-out dimensions for 24-pin standard industrial connectors. The KEL-FG-ER-B is suited for cut-outs 36 × 46 mm.
The single-row versions KEL-FG-ER-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
Due to the integrated seal on the flange enclosure, a protection class of up to IP65 is provided. An additional flat rubber gasket is included in the shipment.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Part No.
42341
Specifications
Flame class
UL94-V0, self-extinguishing
Temperaturbereich Range Max
90 C°
Properties
Halogenfrei, UV-resistant, vibration proof, Silikonfrei
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Integrated seal
Protection class IP65 acc. to EN 60529
Installation at an angle of 90° to the wall
Mechanical protection of the cable directly at the place of entry
Protection against water splashes and drips
Ideal for cables with connectors (max. Ø 35 mm)
Strain relief according to EN 62444
High flexibility when using the IMAS-CONNECT™ system
Product variants and sizes
KEL-FG-ER-E3
Number
42346
EAN
4251269328848
Packaging Unit
Unknown
No. of screw holes
2
KEL-FG-ER-E2
Number
42345
EAN
4251269328831
Packaging Unit
Unknown
No. of screw holes
2
KEL-FG-ER-E5
Number
42347
EAN
4251269328855
Packaging Unit
Unknown
No. of screw holes
2
The cable entry frames KEL-FG-ER are suited for installation of cables with connectors and conduits at an angle of 90° to the cabinet, enclosure or machine wall, providing an IP65 rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 13 to 35 mm (single-hole grommets KTG 13 - KT 34).
The KEL-FG-ER-A frame matches exactly the cut-out dimensions for 24-pin standard industrial connectors. The KEL-FG-ER-B is suited for cut-outs 36 × 46 mm.
The single-row versions KEL-FG-ER-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
Due to the integrated seal on the flange enclosure, a protection class of up to IP65 is provided. An additional flat rubber gasket is included in the shipment.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.