UT | Split U-shaped cable grommet
for cables with connectors, tool-free assembly / up to IP54
The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorised cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures.
The wall thickness of the enclosure can be from 1 to 4 mm.
The UT is a split grommet that can be mounted around the cable. The UT grommet is ideal for installation on the lower part of the enclosure.
After fitting the grommet with the cable, it is inserted into the recommended cut-out. The enclosure cover is then placed on the lower part.
By screwing the cover tightly on the enclosure, pressure acts on the cable grommet and, depending on the properties of the enclosure, enables a sealing rate of up to IP54.
Part No.
56003
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, UV-resistant, Silikonfrei
Temperaturbereich Range Max
100 C°
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Allows the routing and sealing of cables that can vary in diameter up to 2 mm
Simple, tool-free assembly
Can be used for cable diameters from 4 to 11mm
Protection class up to IP54 (if the grommet is selected correctly and depending on the enclosure properties)
Cost-effective solution
Product variants and sizes
UT 6-8 gy
Number
56003
EAN
4251269335426
Packaging Unit
Unknown
For min. wall thickness
1 mm
UTB bk
Number
56100
EAN
4251269335464
Packaging Unit
Unknown
For min. wall thickness
1 mm
UTB gy
Number
56000
EAN
4251269335396
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 5-7 gy
Number
56002
EAN
4251269335419
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 9-11 gy
Number
56006
EAN
4251269335457
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 5-7 bk
Number
56102
EAN
4251269335488
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 9-11 bk
Number
56106
EAN
4251269335525
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 6-8 bk
Number
56103
EAN
4251269335495
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 7-9 bk
Number
56104
EAN
4251269335501
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 7-9 gy
Number
56004
EAN
4251269335433
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 8-10 bk
Number
56105
EAN
4251269335518
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 8-10 gy
Number
56005
EAN
4251269335440
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 4-6 gy
Number
56001
EAN
4251269335402
Packaging Unit
Unknown
For min. wall thickness
1 mm
UT 4-6 bk
Number
56101
EAN
4251269335471
Packaging Unit
Unknown
For min. wall thickness
1 mm
The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorised cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures.
The wall thickness of the enclosure can be from 1 to 4 mm.
The UT is a split grommet that can be mounted around the cable. The UT grommet is ideal for installation on the lower part of the enclosure.
After fitting the grommet with the cable, it is inserted into the recommended cut-out. The enclosure cover is then placed on the lower part.
By screwing the cover tightly on the enclosure, pressure acts on the cable grommet and, depending on the properties of the enclosure, enables a sealing rate of up to IP54.