KT CR multi | KT CR special | Multi-hole / special cable grommets
for the use in cleanrooms, 1 - 8 mm / IP54 / UL Type 12
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
Part No.
41253.600
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, Silikonfrei
Temperaturbereich Range Max
100 C°
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Enable routing of pre-terminated cables through cable entry frames and split cable glands
Available for a large range of cable diameters
Greatly increased cable density when using double or quadruple grommets
Product variants and sizes
ATG CR (S)VOC gy
Number
41253.600
EAN
4251269326929
Packaging Unit
Unknown
Mounting height
2 mm
ATG CR gy
Number
41253.601
EAN
4251269327131
Packaging Unit
Unknown
Mounting height
2 mm
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.