KEL-DPZ CR multi-membrane cable entry plates
for the use in cleanrooms / up to IP66 / UL Type 12
KEL-DPZ CR cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The KEL-DPZ CR products are a cost and time saving alternative to traditional cable glands.
The assembly of the KEL-DPZ CR with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ CR provides strain relief and protection up to IP66 / UL type 12.
The KEL-DPZ CR matches exactly the cut-out dimensions of 6-, 16- and 24-pin standard industrial connectors. The size KEL-DPZ-B CR fits on cut-outs 46 × 46 mm. The very compact size KEL-DPZ-E CR is designed for routing cables in very small space. Through a cut-out of only 18 × 112 mm, up to 21 cables can be easily routed and sealed.
Especially for Rittal KL / KX terminal boxes the size KEL-DPZ-KX/KL CR (IP65) was created. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
Part No.
43790.601
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, Silikonfrei
Temperaturbereich Range Max
100 C°
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Fast mounting
High cable density
Certified protection up to IP66 (acc. to EN 60529)
Automatic sealing and strain relief for the cable
Hygienic design - free of dirt-collecting recesses
Space-saving shape
Product variants and sizes
KEL-DPZ-E 112|21 CR gy
Number
43790.601
EAN
4251269327827
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|21 CR (S)VOC gy
Number
43790.600
EAN
4251269327704
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|7 CR (S)VOC bk
Number
50780.600
EAN
4251269327742
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|21 CR bk
Number
50790.601
EAN
4251269327872
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|7 CR bk
Number
50780.601
EAN
4251269327865
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|21 CR (S)VOC bk
Number
50790.600
EAN
4251269327759
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|7 CR gy
Number
43780.601
EAN
4251269327810
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ-E 112|7 CR (S)VOC gy
Number
43780.600
EAN
4251269327698
Packaging Unit
Unknown
No. of screw holes
2
KEL-DPZ CR cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The KEL-DPZ CR products are a cost and time saving alternative to traditional cable glands.
The assembly of the KEL-DPZ CR with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ CR provides strain relief and protection up to IP66 / UL type 12.
The KEL-DPZ CR matches exactly the cut-out dimensions of 6-, 16- and 24-pin standard industrial connectors. The size KEL-DPZ-B CR fits on cut-outs 46 × 46 mm. The very compact size KEL-DPZ-E CR is designed for routing cables in very small space. Through a cut-out of only 18 × 112 mm, up to 21 cables can be easily routed and sealed.
Especially for Rittal KL / KX terminal boxes the size KEL-DPZ-KX/KL CR (IP65) was created. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.