KEL-DPU | Multi-membrane cable entry plates
with high strain relief function, pluggable / IP66 / IP68 / UL Type 12/4X
KEL-DPU entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68* / UL type 12 & 4X** ratings. The gland KEL-DPU is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.
The KEL-DPU 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself. The grey KEL-DPU 24 is also available with threaded bushings. When plugging or screw fixing the KEL-DPU from the inside of the enclosure the screw holes remain completely sealed by the elastomer layer.
The assembly of the KEL-DPU with unterminated cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
* IP65/IP66/IP67/IP68 when screw mounted, IP65/IP66 when snapped into the cut-out
** 4X for indoor use only
Part No.
43940
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, Silikonfrei
Temperaturbereich Range Max
100 C°
Temperaturbereich Range Min
-40 C°
Advantages and benefits
High stability, vibration resistant
Fast and easy assembly
High cable density
Certified protection IP66 / IP68* (acc. to EN 60529)
Hygienic design - free of dirt-collecting recesses
Product variants and sizes
KEL-DPU 24|21 bk
Number
50930
EAN
4251269315343
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|17 bk
Number
50934
EAN
4251269315367
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16-1 bk
Number
50932
EAN
4251269315350
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|13 gy
Number
43940
EAN
4251269311031
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16-1 gy
Number
43932
EAN
4251269310997
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|17 gy
Number
43934
EAN
4251269311000
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|20 bk
Number
50938
EAN
4251269315381
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|21 gy
Number
43930
EAN
4251269310980
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|14 bk
Number
50944
EAN
4251269315411
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|14 gy
Number
43944
EAN
4251269311055
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16 bk
Number
50936
EAN
4251269315374
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|13 bk
Number
50940
EAN
4251269315398
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|20 gy
Number
43938
EAN
4251269311024
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16 gy
Number
43936
EAN
4251269311017
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|32 gy
Number
43942
EAN
4251269311048
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|32 bk
Number
50942
EAN
4251269315404
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68* / UL type 12 & 4X** ratings. The gland KEL-DPU is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.
The KEL-DPU 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself. The grey KEL-DPU 24 is also available with threaded bushings. When plugging or screw fixing the KEL-DPU from the inside of the enclosure the screw holes remain completely sealed by the elastomer layer.
The assembly of the KEL-DPU with unterminated cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.