KEL-DPU-OD | Multi-membrane cable entry plates
for extreme conditions, pluggable / IP66 / IP68 / UL Type 4X
The KEL-DPU-OD is ideally suited for applications in which cable entry components are permanently exposed to strong UV radiation, weathering and temperature fluctuations. Compared to standard versions, it offers increased material resistance and extended service life in outdoor environments. Thanks to its approvals, it is particularly suitable for the use in photovoltaic systems (UL 6703, UL 6703A, UL 3703, UL 1703).
F1 listing (UV and weather resistance according to UL 746C): The long-term durability means an increased service life without embrittlement or material fatigue.
KEL-DPU-OD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68* / UL type 4X ratings. The gland KEL-DPU-OD is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.
The KEL-DPU 24-OD matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself. When plugging the KEL-DPU-OD from the inside of the enclosure the screw holes remain completely sealed by the elastomer layer.
The assembly of the KEL-DPU-OD with cables can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
* IP65/IP66/IP67/IP68 when screw mounted, IP65/IP66 when snapped into the cut-out
Part No.
63932
Specifications
Temperaturbereich Range Max
120 C°
Flame class
UL94-V1
Properties
UV-resistant, vibration proof, Silikonfrei
Temperaturbereich Range Min
-40 C°
Advantages and benefits
High stability, vibration resistant
F1 listing (UV and weather resistance according to UL 746C)
Reliable protection in extreme climatic environments
Fast and easy assembly
High cable density
Certified protection IP66/IP68 (acc. to EN 60529) and UL Type 4X
Product variants and sizes
KEL-DPU 24|17-OD
Number
63934
EAN
4251269338441
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16-OD
Number
63936
EAN
4251269338427
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|32-OD
Number
63942
EAN
4251269338472
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|21-OD
Number
63930
EAN
4251269338465
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|13-OD
Number
63940
EAN
4251269338403
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|14-OD
Number
63944
EAN
4251269338410
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|20-OD
Number
63938
EAN
4251269338458
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
KEL-DPU 24|16-1-OD
Number
63932
EAN
4251269338434
Packaging Unit
Unknown
Cut-out size
112 × 36 mm
The KEL-DPU-OD is ideally suited for applications in which cable entry components are permanently exposed to strong UV radiation, weathering and temperature fluctuations. Compared to standard versions, it offers increased material resistance and extended service life in outdoor environments. Thanks to its approvals, it is particularly suitable for the use in photovoltaic systems (UL 6703, UL 6703A, UL 3703, UL 1703).
F1 listing (UV and weather resistance according to UL 746C): The long-term durability means an increased service life without embrittlement or material fatigue.
KEL-DPU-OD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68* / UL type 4X ratings. The gland KEL-DPU-OD is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.
The KEL-DPU 24-OD matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself. When plugging the KEL-DPU-OD from the inside of the enclosure the screw holes remain completely sealed by the elastomer layer.
The assembly of the KEL-DPU-OD with cables can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.