KEL-DPZ | Multi-membrane cable entry plates
with high cable density / up to IP66 / UL Type 12
KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The KEL-DPZ products are a cost and time saving alternative to traditional cable glands.
The assembly of the KEL-DPZ with unterminated cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ provides strain relief and protection up to IP66 / UL type 12.
The KEL-DPZ matches exactly the cut-out dimensions of 6-, 10-, 16- and 24-pin standard industrial connectors. The size KEL-DPZ-B fits on cut-outs 46 × 46 mm. The very compact size KEL-DPZ-E is designed for routing cables in very small space. Through a cut-out of only 18 × 112 mm, up to 21 cables can be easily routed and sealed.
Especially for Rittal KL / KX terminal boxes the size KEL-DPZ-KX/KL (IP65) was created. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.
The new cable entry plate KEL-DPZ-FL21 (IP65) has been specially developed for the standard FL21 cut-out. It can be mounted with screws or rivets as required. Screws are not included in the scope of delivery, rivets (IP54) can be ordered as an option.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings (except KEL-DPZ 6 / KEL-DPZ-KX/KL / KEL-DPZ-FL21). Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Part No.
43798
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, Silikonfrei
Temperaturbereich Range Max
100 C°
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Fast mounting
High cable density
Certified protection up to IP66 (acc. to EN 60529)
Automatic sealing and strain relief for the cable
Hygienic design - free of dirt-collecting recesses
Space-saving shape
Product variants and sizes
KEL-DPZ-B 13 gy
Number
43794
EAN
4251269310690
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ-B 17 bk
Number
50796
EAN
4251269315329
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ-B 13 bk
Number
50794
EAN
4251269315312
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ-B 25 gy
Number
43798
EAN
4251269310713
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ-B 17 gy
Number
43796
EAN
4251269310706
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ-B 25 bk
Number
50798
EAN
4251269315336
Packaging Unit
Unknown
Diam. of screw holes
5.7 mm
KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The KEL-DPZ products are a cost and time saving alternative to traditional cable glands.
The assembly of the KEL-DPZ with unterminated cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ provides strain relief and protection up to IP66 / UL type 12.
The KEL-DPZ matches exactly the cut-out dimensions of 6-, 10-, 16- and 24-pin standard industrial connectors. The size KEL-DPZ-B fits on cut-outs 46 × 46 mm. The very compact size KEL-DPZ-E is designed for routing cables in very small space. Through a cut-out of only 18 × 112 mm, up to 21 cables can be easily routed and sealed.
Especially for Rittal KL / KX terminal boxes the size KEL-DPZ-KX/KL (IP65) was created. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.
The new cable entry plate KEL-DPZ-FL21 (IP65) has been specially developed for the standard FL21 cut-out. It can be mounted with screws or rivets as required. Screws are not included in the scope of delivery, rivets (IP54) can be ordered as an option.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
It is also possible to integrate threaded bushings (except KEL-DPZ 6 / KEL-DPZ-KX/KL / KEL-DPZ-FL21). Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.