KVT 80 | Split cable gland
for cables with connectors, suitable on cut-out M80 / IP54 / UL Type 12
The KVT 80 split cable glands are designed for routing and sealing cables with connectors. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
By assembling the two frame halves with the screws provided, the grommets provide sufficient pressure on the routed cables to obtain a high degree of strain relief. By using multi-hole grommets up to 24 lines can be routed with one cable gland. The KVT 80 can be fitted to a wall thickness from 1.5 mm to 10 mm. A flat rubber gasket is included in the shipment.
Note:
When mounting the KVT 80 on sheet metal, we recommend the following torque values:
1.5 mm sheet = 1 Nm | 2 - 10 mm sheet = 1.5 Nm
Part No.
45236
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
Halogenfrei, Silikonfrei
Temperaturbereich Range Min
-30 C°
Temperaturbereich Range Max
100 C°
Advantages and benefits
Routing of cables with and without connectors
Warranty on pre-terminated cables remains
Retrofits, repairs and maintenance can be done much more easily and quickly
High cable density, wide variety of grommets
Fast and easy mounting from the front side
Strain relief according to EN 62444
The KVT 80 split cable glands are designed for routing and sealing cables with connectors. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
By assembling the two frame halves with the screws provided, the grommets provide sufficient pressure on the routed cables to obtain a high degree of strain relief. By using multi-hole grommets up to 24 lines can be routed with one cable gland. The KVT 80 can be fitted to a wall thickness from 1.5 mm to 10 mm. A flat rubber gasket is included in the shipment.
Note:
When mounting the KVT 80 on sheet metal, we recommend the following torque values:
1.5 mm sheet = 1 Nm | 2 - 10 mm sheet = 1.5 Nm